Paraffin & Asphaltene Remediation
The only non-hazardous, environmentally responsible remediation solution in existence that effectively removes paraffin wax and asphaltenes, and assists in the prevention of such materials adhering to the tubing and pipe walls.
WellRenew® is a non-hazardous, granular product that is activated with fresh water or produced salt water. It's temperature independent. Unlike solvents, temperatures of 40 °F (4 °C) or less do not affect its ability to remove or prevent paraffin, asphaltenes, or mineral scales build-up.
IDEAL PRODUCTS
SCOPE OF SERVICE
IDEAL® is a technology which uses products formulated to remediate the deposition of paraffin wax and asphaltenes, allowing you to optimize production efficiency and ensure the flow of hydrocarbons from the reservoir to the refinery.
Common problems caused by paraffin deposits:
- Restriction of flow or complete blockage in pipelines.
- Increases in pumping & flowing tubing pressures.
- Accumulations in valves and storage tanks.
- Interference with valve operations and down hole equipment.
- Reduction of tubular internal diameter.
- Flow assurance product recommendations.
- Wellbore tubular remediation.
- Pipeline remediation.
- HLB (Hydrophilic Lipophilic Balance).
Deliverables:
- Patented flow assurance applications.
- Increase in pipeline throughput.
- Improvement of well productivity.
- Reduction in overall production costs.
WELLRENEW®
PIPERENEW®
Applications:
- Down hole buildup.
- Storage vessels & tanks.
- Plugged tubular.
Advantages:
Works at subsea temperatures below 40 °F (4 °C)
Not limited by the size or length of a pipeline.
Suitable for trunk lines, transfer lines, or process lines.
Non-hazardous and environmentally responsible.
Offshore and land applications.
Applications:
- Pipelines and flowlines.
- Storage vessels & tanks.
- Oil refinery piping.
A specially blended, granular material that uses surfactants and encapsulated oxygen to increase water activity and allow for the penetration of pipe plugs over any distance.
DOWNLOADS
WellRenew®
[Español]
2.46 MB
GALLERY
WellRenew®: Equipment Specs
WellRenew®: Mixing Tank 50 BBL
WellRenew®: Tanks
WellRenew®: Mixer (Tare: 100 pounds)
WellRenew®: Mixer (2' W x 4' L x 38 1/2" H)
WellRenew®: C Pump with Diesel Engine (Tare: 6,000 pounds)
WellRenew®: Pump attached to a slider
WellRenew®: Pump attached to a slider
WellRenew®: Mix Equipment Setup
<
>
X
